FBG Displacement Sensor DST-02 is a FBG technology based pull-rope displacement sensor, which is suitable for measuring the joint opening or boundary displacement between concrete blocks (such as the sinking tube of the segment meter), and can also test the change of the expansion joint at the beam end.
The product connects two components to be tested through a steel wire rope. When there is a relative displacement between the components, the steel wire rope is pulled out or retracted, and the displacement is converted into a stress on the internal fiber Bragg grating, thereby changing the wavelength output value of the FBG to achieve the purpose of testing. Built-in temperature FBG can be used for temperature measurement and temperature compensation for displacement gauge.
High precision, high stability & reliability
Built-in temperature compensation
All-optical measurement, intrinsically safe
Easy to install, and connect with other sensors
Bridge expansion displacement measurement
Tunnel crack displacement measurement
Slope slip displacement measurement
Parameter | Unit | Value |
Center Wavelength | nm | 1460 ~ 1610 |
Displacement Range | mm | 10 ~ 1000 |
Displacement Resolution | mm | 0.1% F.S. |
Displacement Accuracy | mm | 0.5% F.S. |
Temperature Compensation | -- | Built-in |
Material | -- | SS316L |
Dimension | mm | 285x100x23 |
Installation | -- | Mechanical fixation |
Pigtail Length | m | Φ6mm armored cable, 1m single-ended dual-fiber, or customize |
Optical Connector | -- | FC/APC, or customize |
Operating Temperature | °C | -20 ~ +80 |
Latest News at ArGrating FBG Sensing
2023-Aug-12
+
2023-Jun-01
+
2023-May-15
+
English
中文
日本語
한국어
français
Deutsch
Español
italiano
русский
português
العربية
