Surface mounted FBG strain sensor MS-01/MST-01 can meet the strain measurement needs of various occasions, and can be installed in different monitoring positions such as concrete surfaces or steel surfaces. Mainly used to measure the strain of steel structures and concrete surfaces. The external strain transmits the strain to the internal fiber grating through the sensor mounting base, and the high-precision fiber grating converts the sensed tiny strain into a sensitive optical wavelength, which is analyzed by an FBG interrogator.
High precision, resolution, and stability
Buit-in Temperature Compensation (MST-01)
Anti-electromagnetic interference
Long-term zero point stability
Easy to set up distributed sensor network
Easy to install and reusable
Suitable for strain monitoring of bridges, gas pipelines, etc
Large steel structures such as transmission line towers, cranes, hoists
Strain monitoring of rail surface
Steel structure & concrete surface strain measurement
Parameter | Unit | Value | |
MS-01 | MST-01 | ||
Center Wavelength | nm | 1460 ~ 1610 | |
Range | με | ±1500 | |
Resolution | με | 0.01% F.S. | |
Accuracy | με | 0.1% F.S. | |
Temperature Compensation | -- | No | Yes |
Material | -- | Stainless steel | |
Dimension | mm | Φ12 x 126 | |
Installation | -- | Welding | |
Pigtail Length | m | Φ3mm armored cable, 1m at both ends, or customize | |
Optical Connector | -- | FC/APC, or customize | |
Operating Temperature | °C | -20 ~ +80 |
The sensor accuracy does not contain error sources originating from the read-out equipment.
Latest News at ArGrating FBG Sensing
2023-Aug-12
+2023-Jun-01
+2023-May-15
+